In addition to hindering their ability to perfect their golf swing, ill-fitting equipment makes the game more frustrating and discourages them from even trying.

A golfer can set himself up for failure if a club is too short, too long, too light, too heavy, the lie angle is inaccurate, the club itself is the wrong design, or any other parts is incorrect.

Therefore, we looked into the costs of golf club fitting and all the other relevant information to help you evaluate whether this is something for you. Read on!

How much does it cost to get fitted golf clubs?

The information below provides a detailed analysis of the golf club fitting expenses we observed across various fitting venues in the US.

Custom fitting fees are occasionally not paid at all at individual manufacturer ‘fitting days’ and golf outlets.

How does a golf club fitting work?

It’s essential to research the types of clubs you’d like to try because this will offer you and the fitter a good starting point.

Each golfer is interviewed before the custom fitting procedure. A professional club fitter is not in the golf industry to sell you new clubs but rather to help you play better golf.

After the interview, the player begins relaxing using a golf simulator, and the professional fitter starts observing trends.

A golf fitting expert examines every aspect of your game to choose the right clubs to help you perform at your best.

They will set you up on their launch monitor system and have you hit a few shots with your current set to get you started.

It aids them in figuring out what modifications need to be done to improve their ball striking and accomplish the flight they want.

Fitters pay close attention to the center of the strike, swing speed, club length, face angle, lie angle, shaft flex, grip size, and weight.

How long does a golf club fitting take?

• Driver or iron fittings normally take between 45 and 60 minutes.
• Woods fittings usually take 60 minutes.
• Wedge fittings usually take 30 minutes.

Is it worth getting golf clubs fitted as a beginner?

A beginning golfer being told he’s not good enough to get fitted for golf clubs is perhaps the criticism club fitters hear most frequently.

Beginners should get fitted for custom clubs since they benefit the most from using the appropriate equipment for their skill level.

You can begin using only a sand wedge, a pitching wedge, a 7-iron, and a driver.

Since most golfers adjust their swing to their clubheads, beginners who choose clubs that are not a good fit for them can develop undesirable habits that are challenging to overcome.

Many advise beginning golfers to utilize forgiving, off-the-rack clubheads until they start hitting the ball consistently before investing in new equipment.

Get a full bag fitting and buy the best clubs when your game and finances are ready.

Can I get my current clubs custom fitted?

Any golf clubhead can be fitted to a specific player after purchase. You can modify or tweak the club’s grip, loft, and lie during the procedure.

You should know that the golf club fitting cost will rise as you change to a club after buying it.

It saves you money in the long run. Certainly, you will get more value from them the more you play.

Can I get my irons fitted after buying them?

If your irons have replaceable heads, you can get them subsequently fitted with shafts. If you’re not using forged ones, altering lie angles could be more difficult.

Even if you are, the lie angle might only be able to be bent by one or two degrees. It probably isn’t worth the trouble to have it fitted if you’re using old clubs.

When you’re ready to purchase a new set of clubs that will last you for at least the next five years, it’s typically ideal to have a complete fitting session.

For amateur golfers, it’s best to change their irons every five years. You should also get fitted every time you do so because golf technology is continuously developing.

Is it worth fitting my current driver?

The short answer is yes. Your driver is one of the most expensive and significant club heads in your bag, so it’s crucial to get fitted for one that complements your swing.

You should be able to hit the golf ball longer and straighter with a driver that has been fitted, which will lower your scores.

A qualified fitter will ensure you choose one with the best shaft and generate the best potential launch and spin rate.

Watch for the next free “fitting day” at your neighborhood club or driving range, and stop by to try it out.

How long do fitted clubs last?

A great set of clubs can last anywhere from 5 to 8 years with good care and occasionally up to 10 years. Remember that your clubheads will take care of you if you take care of them.

But really, it all depends on how many rounds of golf you play yearly. Another rule of thumb is that your custom fitted clubs will last around 300 rounds of golf.

FAQ – Getting Golf Clubs Fitted

The post Golf Club Fittings: Will this transform my game? appeared first on Golftlink.

You can find the best shaft that will improve your game at a professional club fitting shop, and you can find such shops at your local country club as well as a mall.

They will probably ask you to choose between a stiff or regular flex driver.

When picking a stiff or regular flex driver, it’s important to keep in mind that the shaft you select may be different to the shafts of your irons.

Usually, you’ll swing a driver with a wide arc, while you hit your irons with a shallower swing. This may be why you find yourself hitting a driver better than you do your irons, or maybe the other way around.

But which driver is going to improve your game? A stiff driver or a regular flex one?

Below, we’ll cover all the key differences between these two types of drivers and how you can find out which driver is the best one for you.

Key Differences Between Stiff Drivers And Regular Flex Drivers

Before we get into whether you should use a stiff driver or a regular flex driver, let’s take a look at how drivers and irons are set up and their different requirements.

Firstly, drivers and irons are different sizes, with drivers having a bit more loft than an iron, so your swing should aim to hit the ball as high as possible. You can use either a stiff shaft or a regular flex shaft for a driver.

A stiff driver is, of course, a shaft with little to zero flexibility, but a regular shaft is more flexible. Stiff flex shafts are normally larger and heavier.

If your golf club was a vehicle, then the shaft would be the engine. The power behind your swing is created in the shaft, and it then travels through the head of the club to create a powerful swing.

Shafts that are flexible and light will make the driver more powerful, and will cause premature whip-around that covers larger distances than you anticipated.

Meanwhile, a stiff shaft will slow the whip down, and you will achieve less distance.

Types of Golf Shafts and Their Stiffness

Since every golf player will require a different kind of stiffness for their drivers, stiffness is categorized into five different types.

These are:

1. stiff
2. extra-stiff
3. women’s
4. regulars
5. seniors

The right stiff or flexible shaft for a driver can be selected with the assistance of a club-fitter. They will determine what kind of shaft a player needs by having knowledge of the swinging capabilities and how much distance a driver can achieve.

You don’t have to use one shaft for every club, whether that be a stiff shaft or a regular shaft. All clubs play different roles in your game, and therefore require different shafts.

For example, you may prefer a staff that is stiffer for a 7-iron, but have more success with a driver that has a flexible shaft.

If you’re an amateur or recreational player, the general rule is to play with a golf shaft that is flexible for shots with longer distance and a shaft that is on the stiff side for all other shots.

However, your swing speed also factors into this. If you have a high swing speed, you may benefit more from a stiffer golf shaft that is heavier.

However, if your swing speed isn’t that high, a lighter, flexible golf shaft would probably be more beneficial. You also need to keep in mind that the right shaft, whether regular or stiff, will also depend on how fast you hit the ball.

If you’re hitting the ball fast, then you will need a shaft that is stiff.

The Importance Of Having The Right Shaft Flex For Your Club

When you play with a driver that has the wrong shaft flex this will have a disastrous effect on your scores, and can adversely affect your game.

The incorrect shaft flex can lead to shots being inaccurate, an unsatisfying trajectory for your shots, and little distance achieved.

Admittedly, these are short-term issues, but these can lead to long-term issues if you use the same driver that is causing you problems repeatedly over a period of a few months.

Continually using wrong flex shafts can get you into unwanted habits of using the incorrect setup and the incorrect swing speed.

Golf Shaft Flex And Your Swing Speed

When finding the golf shaft flex that is right for you, you need to start by determining your swing speed. There are plenty of golf shafts out there, but only a handful that will be suited to your swing speed.

The swing speed test is the obvious way to determine this, but is there a way to determine your speed without this test? Yes, there is, and it’s pretty simple.

First, look at the number of the club you use to hit the ball 150 yards away. When using a 9-iron, we would recommend a shaft that is extra stiff. However, if you use a 7-iron, a more flexible shaft will suit you.

Meanwhile, a senior flex gift shaft is suited to a 4-iron and 5-iron, and any iron below 4 will align with women’s flex golf shafts.

Other Ways To Find The Right Driver For You

Driver Carry Distance

This is how far you would normally hit the ball from the tee to where it lands with your driver and your woods.

You can test this out at the driving range or with a partner to note the landing spots for you and measure.

Normally, the driver distance with a stiff driver is 240 to 260 yards, and 210 to 240 yards with a regular flex driver.

Club From 150 Yards

This will help you determine the right flex for your irons. Ensure you’re making a typical, rhythmical swing when using this method. The range is a great place to try this method out.

The key measurements for this method are a 6 or 7-iron for a stiff driver, and a 5 or 6-iron for a regular flex driver.

Distance vs. Accuracy

There’s no doubt that hitting a golf ball a mile looks impressive and makes you feel great, but if the ball is not landing where you want it to be, then it can be somewhat anticlimactic.

If your driver has a regular flex, and you’re achieving distance but not accuracy, then you may want to try out a stiffer shaft.

Stiffer shafts could give you some more control of your swing without having to increase the speed of your swing.

Graphite and Steel

The material of the shaft also needs to be taken into consideration when choosing the right one for you.

Graphite and titanium shafts are more lightweight and give you a faster swing than a steel shaft would.

Frequently Asked Questions about Stiff vs. Regular Flex Drivers

The post Stiff vs Regular Flex Driver – Which One Is Right For You? appeared first on Golftlink.

A great golf player isn’t necessarily determined by the number of clubs they have at their disposal. Even the pros almost never use all of them.  So that begs the question; which golf clubs are the most useful?  

The vast majority of professional golfers will be in agreement that the three most essential golf clubs include drivers, wedges, and putters. 

Many golfers make the claim that their putter is responsible for taking off more strokes from their scores compared to all other clubs. This is then closely followed by the wedges and then drivers. 

To score enough points in a round of golf, you’re going to need the right tools for the job.

This article aims to explain which clubs are the most crucial and why. We want to demonstrate to you the reason for these golf clubs being so important compared to the other ones, and why your golf bag must contain these clubs if you want to improve your game. 

The Most Crucial Clubs 

The official rules of golf state that players can only carry a limited set of clubs during any round. Despite the fact that stores sell specific combinations of clubs as sets, professionals can use any combination of legal clubs that work best for their game.

This is highly dependent on how the golfer plays.  Likewise, whatever standard you play at, the right combination of golf clubs is simply the one that works best for you and the way you play. 

The golf clubs that make up the right combination for you depends on your skill level, and where your strengths and weaknesses lie. 

Of course, the right golf clubs for a low handicapper are going to be pretty different compared to the right golf clubs for a complete beginner. 

For players with a high handicap, it’s beneficial for them to focus on using golf clubs that are easy to use, such as hybrid clubs rather than long irons and 5-3 woods rather than a driver. 

More experienced golfers, on the other hand, can use more specialized clubs in order to play a wide variety of shots.

High-Handicappers

Typically speaking, high handicappers cannot hit the driver, because it can put them off their game. 

Because of this, they should only carry the following clubs: 

• Putter
• Pitching wedge 
• 7, 8, and 9 irons
• 3-wood 
• 4, 5, and 6 hybrids 

Mid-Handicappers 

Since more intermediate players have more control over the driver compared to high-handicappers, they should include this club in their arsenal. 

Also, mid-handicappers who are good at short games should also include gaps or the lob wedge in their bags.

The following clubs are ideal for mid-handicappers:

• Putter
• Sand wedge 
• Pitching wedge 
• 6, 7, 8, and 9 irons
• 4 and 5 hybrids
• Driver 

Low-Handicappers 

For very experienced players or low-handicappers, they must carry the following golf clubs in their bags:

• Putter
• Lob, sand, gap, and pitching wedges
• 2 hybrid
• 9 iron
• Driver

As you can see in our lists above, the most used clubs across the board are the driver, putter, and wedge. This is common in both low and high-handicappers, as well as intermediate players. 

Using this as a determiner, it’s safe to say that these 3 clubs are the most important generally speaking. 

The Putter

The putter is certainly an essential part of any golfer’s arsenal. Putters are used for low-speed, short, controlled strokes. 

They are used primarily for hitting the ball into the hole from a short distance on the green. 

Some golf courses, however, have roughs or fringes very close to the green, so the putter might be the best option for a shot from this location.  

Putters are typically constructed from either wood or iron, and it has a low-loft striking face.

Additionally, some putters have positional guides, a non-circular grip, and a bent shaft. 

The putter is a club that is designed for a very specific purpose within the game of golf. For this reason, the putter is regarded as an indispensable golf club. 

The putter is designed to provide you with all manner of technical advantages when you’re on the green.

For instance, the putter is engineered to provide a great impact on the ball, with outstanding glide, the smoothest possible stroke, and the ideal fit regarding the angle of the shaft and the length of the club.

The striking face of the putter isn’t perpendicular in relation to the ground. Instead, it has a small amount of loft with the intention of lifting the golf ball out of an indentation or depression in the ground.  

The loft of the putter cannot legally go above 10 degrees. Typically, the loft is approximately 6 degrees. 

Also, the putter is unique because it is the one and only club which features a bent shaft. Club makers usually produce putters with the club head attached to the shaft for increased stability.  

The reason for the bent shaft is to position of the head in line with the long section of the club. By doing this, the striking face should make contact with the ball at just the right spot on the subhead for the perfect putt.

The reason for this design is to maximize accuracy, as it makes it easier to swing the head through the golf ball.

Many putters feature a hosel to help position the shaft of the club in line with the center of the ball upon impact. Some players find that this helps to improve stability and the quality of the club’s feel. 

The Driver 

When it comes to the driver, there isn’t a one-size-fits-all club. But that’s not to say that golf club manufacturers haven’t been trying!

There are near infinite adjustabilities, such as movable weight settings, adjustable hosels and the like. 

Drivers are used for a tee shot. Because of this, the club is very highly valued for experienced mid to low-handicapped golfers who have better control over their drives. 

It is important for beginners to get a feel for different types of drivers before getting on the course. 

Drivers are categorized under the class of woods, and initially this is how they were referred to. The purpose of woods are to launch the ball long distances.

Typically, drivers feature a long shaft and a large, heavy club head for maximum top club speed. 

Out of every single club in your golf back, the driver is the one that launches the ball the furthest distance thanks to its long shaft and low loft angle.

However, if you don’t have great control off the tee, the increased distance can lead to a decrease in accuracy.  

In this day and age, drivers are available in a wide range of different designs, including different club head sizes and materials. 

Titanium driver heads allow for a more oversized club head, which increases the striking face of the club, giving the driver a larger sweet spot. Because of this, drivers with titanium heads can be a lot more forgiving than other materials.  

Steel-headed drivers, on the other hand, have a much smaller sweet spot. They are less expensive than titanium drivers, though. 

There are also composite drivers that are comprised of titanium along with another metal for the best of both worlds. Composite clubs are typically closer to the mid-range in terms of price. 

With drivers, there are also a variety of factors regarding the shaft that affect the way the club’s head strikes the ball. The material of the shaft is one of these variables.

Steel shaft have increased weight and decreased flex, but they can produce lower power and a slower swing speed at the point of impact. 

The flexability necessary for a driver’s shaft is dependent on the club-head speed. For this reason, low-handicap players desire increased control of the driver that will compensate for the decreased distance. 

Graphite shafts increase the club-head speed and therefore cause an increase in distance. Shafts are available in many different lengths, so you can choose a shaft that is perfect for your particular height.  

The loft of the driver determines the height at which your ball will fly. Most drivers have a loft ranging from approximately 11 to 18 degrees. 

It is desirable to find a driver that has a loft that optimizes the shot’s distance. Loft also increases the roll distance. 

As you increase the loft of your driver, it decreases the amount of side spin upon the ball. This can result in slices or hooks. 

Because of this, low-handicap golfers typically go for a driver with a loft under 11 degrees. Experienced golfers can usually handle these drivers that have a lower loft and are therefore less forgiving. 

One of the more recent innovations in regard to the driver is the introduction of weighted drivers. These weighted drivers that are now on the market are designed for players to have increased control over the flight of the ball.

These weights are removable, and they have a considerable impact on the feel of the driver. The amount of weight on the club and the position of the weights can considerably alter the flight path of the ball.

Wedges 

The clubs with the highest level of lost are the wedges. Wedges were designed for shots that ascend and descend sharply.

These include pitch shots, chip shots, strokes on sand, and short approach shots. 

Wedges are commonly regarded as a specialized subset of irons, but they really are part of a category of their own.  

There are multiple different types of wedges, including the sand wedge, pitching wedge, lob wedge, and gap wedge.

The Sand Wedge (SW)

The sand wedge is specifically designed for hitting the ball out of the bunker. It has a loft of around 56 degrees and 10 degrees of bounce. 

Gene Sarazen is credited for inventing the sand wedge as we know it today, and he used it to win both the US and British Open tournaments in 1932.

Modern wedges typically have more mass than the older, original design in order to help drive the club head through firm sand.  

The Pitching Wedge (PW)

The pitching wedge is commonly thought of as a basic club that is an essential part of every golfer’s arsenal. 

It is known for being the lowest-lofted out of all the wedges. Designed for short-range shots, the loft of most modern pitching wedges are typically around 48 degrees with little to no bounce at all.  

After the turn of the century, club makers have started making additional wedges. The two other commonly used wedges are the lob wedge and the gap wedge.

The Lob Wedge (LW)

The lob wedge is the highest-lofted out of all the wedges, with a loft of approximately 60 degrees. 

This club creates a very sharp ascent and also a steep angle of descent with minimal roll. 

This makes it ideal for chipping onto the green without rolling too far. Lob wedges also typically have a low to mid-bounce.  

The Gap Wedge (GW)

The gap wedge is categorized as somewhere between the sand and pitching wedge. It has a lower loft angle than sand wedges and more than pitching wedges.

Gap wedges are one of the newest additions to the wedge category of clubs. Because of this, it is less standardized in terms of design and purpose.

Video: Which Golf Club to Use and When

This is a great video by GolfbidderTV going through the majority of clubs mentioned above. There are some common rules that could help you on the course!

Frequently Asked Questions – Common Golf Clubs

The post The Most Used Golf Clubs: We Asked 17 Different Golfers appeared first on Golftlink.

As well as getting your head around the rules and regulations of golf, you will also need to understand the specifications of certain types of equipment.

As well as the golf balls, the golf clubs you use are vital for performing well. For those new to golf, it is common to wonder how golf clubs actually work.

A lot of thought and science goes into the design of golf clubs to ensure they suit all scenarios and terrains on different courses.

While you probably know that golf clubs are used to hit golf balls, you may not know why there are so many types of golf clubs in a golf bag.

Then, there are the numbers etched onto each club and the different shaped clubheads. What do these numbers mean?

In today’s article, we will be answering these questions and more. So, if you want to find out how golf clubs work and why there are different types, read on as we discuss golf clubs in detail. 

Golf Club Numbers: What Do They Mean?

For those of us who have played golf before, we would have noticed different shaped golf clubs. Not only are these clubs unique from one another, but some are marked with particular numbers.

While you may think that these are just manufacturer numbers or simply random, this is not the case. These numbers simply refer to the angle of the golf clubface known as the ‘loft.’

Golf club numbers range from two to nine. However, not every club is numbered.

Numbered golf clubs:

• 3-wood
• 5-wood
• 2-iron 
• 3-iron
• 4-iron 
• 5-iron 
• 6-iron 
• 7-iron 
• 8-iron
• 9-iron

The non-numbered golf clubs are:

• The Driver 
• The Pitching Wedge
• The Sand Wedge
• The Lob Wedge
• The Putter

When the loft of a club is adjusted, the height and/or distance of the golf ball being struckwill be impacted. 

The lower a golf club’s number, the lower its loft will be. This simply means that the clubface’s angle is not as prominent. Therefore, the golf ball can and should travel further but at a lower height.

If a club has a higher number, it will have a higher loft. This means the angle of the clubface is more profound.

As you can guess, this has the opposite effect to those with lower lofts. The golf ball will travel higher in the air but over a shorter distance. 

Average distance of common golf clubs

When we consider the clubs mentioned above, their loft numbers can help us estimate the average distance each club can hit a golf ball. 

Of course, a putter is used for more delicate shots on the green when force and distance are not as important.

By looking at the numbers of different clubs above, they can help give you some perspective on which club is best for certain distances and situations on the golf course. 

The more you play golf, the more you will realize that physics plays a vital role in the sport.

By learning the certain angles of golf clubs, you can correctly play the right shots in important moments of the game.

3 And 5 Wood vs 3 And 5 Iron

You may have noticed 3 and 5 wood clubs and 3 and 5 iron clubs above. Although they share the same numbers, the difference between these is the material used in the construction of the clubs. 

While a 3 wood and 3 iron would have equal loft angles, just as a 5 wood and 5 iron would, the different materials they are made from means they are better suited for various types of shots on the golf course. 

While 3 and 5 iron clubs are made from iron, their purpose is not for the golfer to play longer distanced shots. For shots ranging around 210 yards, a 3 wood is best suited.

A 3 iron would be best for shots in the range of 180 yards so a significantly shorter distance. A 5 wood club is best for shots of around 180 yards whereas a 5 iron is best used for distances of approximately 160 yards. 

Just because iron is a harder material than some other metals, it doesn’t mean the golf ball will always travel further.

Nevertheless, a 5 wood, and a 3 iron are typically used for equal distanced shots. Therefore, these clubs should be chosen based on the loft you require for a particular shot.

What are the differences between wood and iron golf clubs?

Wood golf clubs are considered to be long-range clubs. These are typically used at the beginning of a hole when teeing off. However, some very long courses will see a wood golf club used for the second swing.

As for their design, wood club heads are typically large and circular with a flat frontal design to cleanly strike the ball hard.

Iron golf clubs are typically used after you have teed off. The design of these clubs is different from wood clubs as irons tend to have more intense angles.

The majority of golfers also have more iron golf clubs in their bags than wood clubs so they can have a particular model for particular shots over different courses. 

Different Types of Golf Clubs 

Most golfers will carry 12 clubs with them on the golf course. Each club is unique and specially designed for specific purposes.

But, when you are playing eighteen holes with varying distances and terrains, each club will usually be used at least once during a game.

Wood Golf Clubs 

We have already discussed what sort of shots wood golf clubs are used for on a golf course but why are they called woods when they are actually made from metal? Well, the answer is simple. Before the 1980s, wood clubs were made from wood.

Metal became the preferred material because of a few reasons such as its lower center of gravity. Wooden clubs can not achieve this as they can not be molded into precise shapes in the way metal can be. 

Woods are usually used for shots that are around 175 yards or more from the green. If you are closer than this, woods are not as effective.

As for the driver, also referred to as a 1 wood, this club has a very low loft. This loft is typically between 7 and 12 degrees making it ideal for long-distance shots. But, if you’re looking for more height, a driver would not be the best option. 

The club head of a driver is typically made from titanium alloy or steel while its average length is around 45 inches. This longer length means that it can be pretty difficult to swing the club, especially for beginners. 

When you’re on the course, a driver is best suited for shots off the fairway. However, even some professionals find these shots hard with a driver due to their low loft. This means trying to achieve much height is somewhat difficult. 

The 3 and 5 wood golf clubs that most golfers carry in their bags are commonly referred to as fairway woods. As you can probably guess, this is because they are typically used for their second shots on the fairway (unless you’ve mishit and the ball has gone into the rough).

A 3 wood golf club has a typical loft of between 15 and 18 degrees while a 5 wood can have a loft of between 20 and 22 degrees. So, for further shots, you would go with the 3 wood and for higher shots, you’d choose the 5 wood.  

You can also use a 2 wood on the golf course but these are not as common. With evolving technology and supreme designs, 2 and 4 wood golf clubs are somewhat redundant and rarely used compared to a few decades ago.

Iron Golf Clubs 

Iron clubs are usually used for shots that are less than 200 yards away from the green. The closer you get to the green, the higher the irons will generally be. 

A set of irons typically includes numbers 3, 4, 5, 6, 7, and 8 as well as the pitching wedge. Whether it’s a long-range shot or a short shot, these clubs can be used on all 18 holes. 

When you first compare woods or hybrids with irons, you will immediately notice how much thinner iron golf clubs are. This skinnier design can help golfers achieve more accurate strikes on the course.

While accuracy is important from the tee-off, it becomes even more critical the closer you get to the hole. Therefore, you will want to choose the right club for every shot. 

With deeper grooves on an iron’s clubface, you can usually generate a more exaggerated spin on the ball. This can be extremely useful when navigating tricky greens where the ball may easily shoot off and travel too far.

That being said, beginners will not see much difference when using some of these clubs. To really experience the benefits of these golf clubs and their distinctive designs, you would need to practice regularly.

This is why it is only experienced golfers who tend to benefit from the intricacies of these clubhead’s designs. 

Hybrids 

You may have heard of hybrid golf clubs. In recent years, these have become increasingly popular with golfers as they combine a fairway wood’s head design with the shaft length of an iron.

For more experienced golfers, these hybrids can help improve their skill levels quite significantly.

If a golfer chooses to use a hybrid, they will usually replace other clubs. More often than not, it’s longer irons, like the 3 and 4 irons that are replaced. By using hybrid golf clubs, the playability can be improved. 

Hybrids are best suited to more experienced golfers. For beginners, it is better to stick to standard golf clubs and learn how these feel for different shots.

As you progress, you can move on to some hybrid models and discover if they have any beneficial effect on your game at all. 

Wedges 

Wedges are a must for every golfer. This is why the majority of players have at least one or two in their kit bag. The loft of a wedge tends to increase around 4 lofts meaning each one is best suited for specific types of shots. 

Overall, there are 4 main types of wedges:

1. The gap wedge
2. The lob wedge
3. The sand wedge
4. The pitching wedge 

A gap wedge is also called an approaching wedge. These wedges are best for longer distances and if you want to ensure the best accuracy possible, gap wedges are also useful closer to the green.

A lob wedge is ideal for very high shots that also require quite a bit of spin. Lob wedges help golfers achieve more power when striking the golf ball close to the green. So, if you need to spin the ball back toward the hole, a lob wedge is the club to use. 

The sand wedge is the most widely used out of all the wedges. This is because it is best for those shots out of the bunker, we’ve all been there more than we’d like to admit!

Although sand wedges are not ideal for long-distance shots, they are a great club to use for striking the ball high off the ground to get out of precarious situations. 

A pitching wedge will usually be placed with a set of irons and sold with an iron set. This is one of the more versatile clubs in the kit bag as it can help you hit high shots that land on the green with as little backspin as required.

Putters  

Putters may not be as powerful as wood or iron golf clubs but they are just as important. The main purpose of a putter is to hit the golf ball with precision and accuracy so it goes into the hole.

A putter’s design helps golfers achieve this accuracy for short distances on the green and low-speed strokes.

Go into every golf bag and you will find a putter. Upon closer inspection, you will find that putters feature a steel shaft as well as a grip on the shaft allowing your thumb to rest comfortably during shots. 

As for the face of a putter, these can vary from one to another. Nevertheless, the majority tend to be completely or somewhat flat. The clubface of putters is generally a lot smaller than other types of clubfaces too.

The two main types of putters

1. The blade putter
2. The mallet putter

A blade putter is designed with a small head which is the most commonly used by golfers. For the best accuracy possible, blade putters should be the club of choice. 

Mallet putters may not be as common as the blade type but over recent years, they have become more popular with golfers.

As the name suggests, a mallet putter is top-heavy like a mallet. The clubhead’s weight is quite far from the club’s face which helps stabilize the putter head as you strike the golf ball.

If you’ve done all the hard work of getting the ball to the green and you have a straight shot left to the hole, a mallet putter is your best option. 

Different Shafts 

You can choose between steel and graphite shafts on your golf clubs. Steel shafts are superb for extra strength and stability through the strokes.

However, these tend to be much heavier than their graphite counterparts. As you can imagine, the heavier a shaft on a club is, the more power and effort are needed to swing fully. But, for larger built, stronger individuals, a heavier steel shaft shouldn’t be an issue. 

Experienced golfers may find it easier to use steel shafts to strike the ball with more accuracy and for their intended distances with more ease. For beginners, heavier shafts are typically difficult to use.

As for graphite shafts, these are lighter so the speed of the swing is generally faster resulting in longer distanced shots. 

Graphite iron shafts tend to be the better option for beginners or for those who do not possess a great deal of strength. These will help novices become more familiar with their swing and be more comfortable to use. 

A Full Set of Clubs 

A full set of golf clubs usually adds up to 14. For tour players who compete in an event, 14 is the total number of golf clubs allowed in their bags.

If you’re an amateur golfer, you can carry far more with some carrying up to 18 or 20 clubs in their bag.

This is usually down to the fact that some golfers carry hybrid clubs with them as well as their standard models to help them achieve the best shots possible. 

The post How Golf Clubs Work: The Complete Guide appeared first on Golftlink.